Activating Verge WE Phones

To activate a phone you need

• an extension
• a phone
• a PIN

The administrator can provide you with an extension and an initial PIN.

To activate your phone, follow these steps:

1. Disconnect your computer from the network.
2. Plug the phone into the network.
3. Plug the computer into the phone at the port marked PC.
4. Connect one end of the phone power pack into your phone and the other end into a power outlet.
   If your network is configured with Power Over Ethernet (POE), the above step is not necessary.
5. Press Activate.
6. Enter your extension.
7. Enter your PIN.
8. Press Activate.

You have now successfully activated the phone, and can make calls.

See Quick Set-up for information about initial settings you should configure through the web interface.